Bronze-iron

Hand-Forged Ironworks and Restoration

Gates, railings and ornamental ironwork heated, hammered and finished by hand, to suit both new schemes and historic settings.
✓ Genuine Blacksmith Craft
✓ Heritage Sensitive Repairs

Dublin

& County Meath Based

100%

Hand-Forged Quality

Heritage

Conservation Standards
FORGE CAPABILITIES

Blacksmith Skills Applied to Every Commission

Our hand-forged ironworks range from a single hinge to a full set of entrance gates, railings, house furniture, garden furniture, etc.

Gates and
Railings

Entrance gates, pedestrian gates and boundary railings are drawn to your opening, hung true and finished for Irish weather. Matching new work to older ironwork nearby is a particular strength.

Balustrades and Staircases

Iron balustrades bring strength and character to stairs, balconies and public walkways. We shape uprights, rails and scrolls individually, so the design rhythm stays consistent from first bar to last.

Heritage Ironwork Repairs

Aged ironwork can often be saved rather than replaced. We remove failed sections, forge matching pieces and join them, so original character remains visible, even reproducing lost decorative components.

Bespoke Ornamental Features

Brackets, lamp holders, hooks, finials and decorative panels can be made to a drawing or photograph. Small features carry visual weight on public buildings, so proportion and finish receive attention.
THE BLACKSMITH ADVANTAGE

Why Choose Traditional Blacksmith Craftsmanship

Handwork gives a depth of detail and flexibility that repeat production cannot copy.

Authentic Forging Methods

The blacksmith’s trade relies on fire, hammer, and judgement. Modestas Juskauskas trained in traditional techniques and has applied them for more than twenty years, so every scroll, collar and joint reflects real forging experience.

Long lasting Design

Ironwork that outlasts its warranty is the aim. Sound joints, generous sections and well-planned protective coatings help a gate or railings stay in service for decades rather than a few years

Single Point Contact

A craftsman will handle your enquiry, as well as the drawings and site visits. This simplifies communication for busy project managers, who still keep accountability throughout the commission.

FORGING WORKFLOW

How We Shape Iron by Hand

Every gate, railing, and cast iron element entrusted to Bronze Iron Art Studio undergoes a meticulous, multi-stage restorative journey at our fully equipped forge.

4-Phase Restoration Process
On-Site & Studio Analysis

Design and Measurement

We visit the site or study your drawings, measure openings and fixing points, and agree on a design in sketch form. Decisions on style, bar section and finish are settled before any metal is heated.
Cleaning & Stripping

Heating and Shaping

Iron is brought to working heat in the forge, then drawn out, bent, twisted and scrolled over the anvil and formers. Heat control matters; too little makes the metal resist, too much weakens it.
Hot Forge & Repair

Joining and Assembly

Shaped components are fitted together using traditional joints such as collars and rivets, along with welding where appropriate. We test-fit the assembled piece to ensure it hangs and closes smoothly.
Coating & Re-Installation

Finishing and Protection

Surfaces are cleaned, then given a protective system matched to the location. A coastal or exposed site calls for a different treatment from a sheltered courtyard, and we advise accordingly.
IRONWORK SHOWCASE

Forged Ironwork Gallery from Our Forge

Explore recent wrought iron restoration, gate refurbishments, cast iron restoration, bronze, brass restoration completed across Dublin and Ireland.

Visual Portfolio

Traditional Blacksmithing

Restoration Craft

Hand forge Shaping

Sculpture Refurbishment

Bronze, Brass goods restoration and patination

MATERIAL KNOWLEDGE

Why Wrought Iron Behaves Differently Under Heat

Knowing how iron responds to fire and hammering is what separates craft from copying.
Metallurgical Superiority

Heat and Hammering

When iron is heated to a bright orange glow, its crystal structure relaxes and the metal becomes plastic enough to bend, twist and draw out. Hammering then moves the material into its new shape while keeping it dense and sound. Done well; the finished bar holds its form without cracking at bends.
Historic wrought iron contains fine fibres of slag, which give it a grain similar to timber and help it resist corrosion. Most iron sold today as wrought iron is in fact mild steel, which is more uniform but behaves differently when worked. Recognizing which metal is in front of us guides every repair decision.

Iron Material Comparison

Wrought Iron Traits

Fibrous, forgiving and rust-resistant, it is the right match for authentic historic repairs.

Mild Steel Traits

Consistent, strong and widely available, it suits new gates and railings with a traditional look.

Stainless Steel Traits

Corrosion-proof and low-maintenance, it works best where a modern finish is wanted.

Our Work

Forged Commissions Completed Across County Meath

Recent gates and restoration jobs, described by site, scope and finished result.

Before and After Ironwork Transformations Shown

Weathered, damaged or missing ironwork beside the repaired or new piece that replaced it.
Before
After
WORKING PRINCIPLES

Our Standards for Safe Accountable Ironwork

Public clients expect forge work to be safe to install, safe to use and properly recorded. Our approach combines careful site practice with clear written communication, so decision-makers can see what was done and why.

Heritage Sensitive Methods

For older structures, we favour like-for-like repair and minimal intervention. Owners of protected structures should consult their conservation officer, and we will happily provide technical input.

Safe Working Practice

Hot work and heavy fixtures require disciplined site management. Risk assessments and method statements can be supplied for projects that need them.

Clear Written Records

Quotations state the scope, materials, and finish. Photographs taken during the job give you a record for asset registers and future maintenance.

WHO WE SUPPORT

Hand Forged Ironwork for Estates and Authorities

Estate managers, councils and heritage organisations turn to us when ironwork needs a skilled eye and a patient hand. Whether the task is repairing a historic railing, matching a lost gate or creating a new feature that sits quietly beside old fabric, we work from your brief and keep the process simple. Photographs, rough sketches and site dimensions are enough to begin a conversation.
Got Questions?

FAQs

What are hand-forged ironworks and how are they made?
They are items shaped from heated iron using hammers, anvils and tongs rather than being cut and welded from standard sections. The smith controls heat and form directly, producing individual bends, scrolls and joints.
Strength depends mainly on design, section size and material quality. Forging can improve consistency at bends and joints, but a well-engineered fabricated item may be equally robust. We recommend the method that suits your use.
Often they can. Rusted sections can be removed and new iron forged in, loose joints refastened and surfaces recoated. Repair keeps original fabric and is usually preferred on heritage sites.
Protection begins with thorough surface cleaning, followed by a suitable coating system such as primer and paint, or galvanizing for exposed locations. Regular inspection and touch-up extend the life of any coating.
Yes. We study the style, bar sizes, scroll shapes and finish of existing work, then forge new gates in the same language. Photographs of the surrounding ironwork help us get a close match.
Please send opening width, height, post positions, ground conditions, preferred style and any reference photographs. A site visit can be arranged for larger or more complex projects.
We carry out like-for-like repairs and sympathetic additions. Any work to a protected structure should be agreed with the relevant conservation officer, and we can provide material and method details to support that discussion.
Yes. Our forge serves the whole island of Ireland, and we organise transport and installation to suit your location and programme.
Contact Us

Restoration Quote in Dublin and all Ireland

Ready to restore your wrought iron gates, railings, or cast iron balconies, gates, railings, canopies or gazebo. Bronze, Brass, Copper fabrication or casting contact us.
Studio Location

Ballintclieve Moynalty road co. Meath

Direct Call

MODESTAS JUSKAUSKAS: +353 86 218 8744

Scroll to Top